-
Set-Up: Download the Oxiline app, create a profile and log in. Follow the instruction on the app to connect the Pulse MD/XS Pro to the Oxiline app.
-
Prepare: Ensure 5 minutes of relaxation before taking measurement. Remove any jewelry or fingernail polish. When placing the oximeter on your finger, make sure your hand is warm, relaxed, and held below the level of the heart.
-
Measure: Once the oximeter is connected to your smartphone via the Oxiline app follow the steps below
1. Open the Oxiline App
2. Insert one of your fingers into the finger chamber of the pulse oximeter.
Note: The fingernail should be facing the top chamber (which, contains the sensor). Finger should also be inserted completely into the chamber. Otherwise, measurement will be inaccurate.
3. Press the power-on button to turn on the pulse oximeter.
4. Once the Green "Connected" dot it appears, tap the device on the Oxiline App
5. Read correct data from displayed screen and App
6. The Oxiline App will log your data every minute until you turn the device off or leave/close the app
Notes:
When your finger is inserted into the oximeter, your nail surface must be upward. The results may be wrong if you do not place your finger thoroughly in the oximeter.
4. Follow Through: Try to measure at the same time every day. Get help for setting daily notification reminders here
.